Enviro M-55C-FS User Manual download pdf (Page 3)

Dimensions: Amplifier

PS-T1

Unit: mm

End unit

[Included in the PS-T2]

PS-T2

When the mounting bracket

[included in the PS-T1] is attached:

PS-T0

When several units are connected:

No. of L

units

218

327

436

545

654

763

872

981

10 90

11 99

12 108

13 117

14 126

15 135

16 144

87.5

135°

max.

min.

(Maximum

when the

cover is

opened)

*ø3.9 5-core x

Cable length: 2 m

Brown/Blue: 0.34 mm

Black/Orange/Pink: 0.18 mm

(12.5)

(33)

1.1 3

28.5

35.420.7

DIN-rail mounting

36.5

1.1

3.8

22.8

30.8

25.6

25.4

min.

2 x ø3.4

Spot facing: ø6,

2.7 (d)

2 x (4.4 x 3.4)

Spot facing: ø7, 4 (d)

35.4

53.8

9.2

(22.6) 20.8

DIN-rail mounting

87.5

(12.5)

(33)

1.1 3

28.5

35.420.7

min.

ø2.6 single-core

x 0.34 mm

Cable length: 2 m

(Maximum

when the

cover is

opened)

DIN-rail mounting

87.5

(33)

1.1 3

28.5

35.420.7

(Maximum

when the

cover is

opened)

DIN-rail mounting

66L

End unit 1.

End unit

1. The PS-T1, FS-T1, FS-M1, or FS-R0 is mounted in .

2. When using expansion units, be sure to use

the end unit [accessory to the PS-R0, T1, T2].

Rear of the

mounting bracket

1.The response speed varies

depending on the number of

units connected.

2.There is no control

output cable for the PS-T0.

Control output for the PS-T0 is

sent from the FS-R0.

3.Stability output is only provided

by the PS-T1. Stability output

for the PS-T2/T0 is sent from

the PS-T1, FS-T1, FS-M1 or

FS-R0.

4.Power for the PS-T2/T0 is

supplied through the PS-T1,

FS-T1, FS-M1 or FS-R0.

5.When several units are

connected, the ambient

temperature requirement

varies depending on the total

number of units connected.

When 3 to 10 units:

-10 to +50°C

When 11 to 16 units:

-10 to +45°C

When connecting several

units, be sure to mount the

units to a metallic DIN rail.

Make sure that the output

current does not exceed 20

mA.

6.The PS-T0 has no cable.

Output

—

Specifications

(External calibration input circuit)

ctric

circu

Input circuit

Brown

Black

(Control output)

(Stability output)

Orange

Blue

Pink

(

External calibration

)

rcu

rre

ctio

irc

Load

100 mA max.

Load

50 mA max.

12 to 24

VDC

tric

circu

Black

0 V

(Control output)

Load

100mA max.

5 to

40 VDC

Overcurrent

protection circuit

3.3 kΩ

11 kΩ

Pink

12 to 24 VDC

Sensor head

Fine adjustment of every sensor head

If the FS-V1 digital calibration

fiberoptic sensor is configured as

the main unit with several expan-

sion units connected to it, the light

quantity and sensitivity of the

expansion units can be checked

on the FS-V1’s monitor. While

viewing the monitor, the sensitivity

of the expansion units can be

finely adjusted.

Precise adjustment & sensitivity

monitoring

The sensitivity of 3rd PS-T2 (Photo) is

shown on the FS-V monitor.

Fine adjustment of the expansion units

After for additional minute sensitivity adjustments, just press

the UP/DOWN keys for precise sensitivity adjustment.

Quick wiring with a single cable

0-line sensors* can be used without wiring.

By connecting an FS-R0 unit, the output signals from the

sensors will be sent through this connector. Therefore, no wiring

is required for each amplifier. A cable with a MIL connector

enables connection to the I/O card of a PLC or a special board

without complicated conventional wiring.

* Model: PS-T0, FS-T0, FS-M0

Fully automatic calibration

for precise detection

Anyone can calibrate easily

and reliably. Fully automatic,

positioning, or external calibration can

be selected, based on the application.

0-line system

No wires are required (0-line) because the

output signals from the amplifiers are also

sent through the expansion connectors.

Simple plug-in sensor head

The PS01 series employs a snap-on connector which improves

the reliability of the connection to the sensor head. The secure

connector eliminates problems such as connection failures and

the sensor head can be easily replaced for maintenance.

Teflon

-sheathed

Long-range,

definite-reflective

PS-49 / PS-49C

The powerful and highly

directional beam penetrates dirt

or dust. The unit is compact, yet

allows detection at distances of

up to 4 m.

Max. detecting distance: 4 m

The sensor head and cable are

covered with a Teflon

sheath

ensuring trouble-free operation

in areas exposed to chemicals,

solvents, or oil splashes.

Max. detecting distance: 4 m

Teflon

-sheathed,

visible spot

PS-206

The housing is highly resistant to

chemicals and the 6 mm red

beam spot simplifies sensor

positioning.

Max. detecting distance: 70 mm

The 1.5 mm diameter beam spot

simplifies sensor positioning.

Targets as small as 0.1 mm

diameter can be detected from a

distance of 50 mm.

Max. detecting distance: 50 mm

PS-55/PS-55C

The sensor cable

can be cut to any

length.

After the sensor

cable is cut to the

required length, the

newly designed

crimp connector allows simple snap-on

connection. (Patent-pending)

1. Models with a (C) come with plug-in connectors. (For other models, use the connector included with the amplifier.)

2. Use FINE MODE for models which do not feature TURBO MODE.

3. Gives the size of the object which can be detected at the maximum detecting distance.

4. Mutual interference suppression function: Up to three expansion units used without mutual interference.

Models without mutual interference suppression function: Even when several expansion units are used in close proximity, chattering will not occur . However, sensitivity may vary due to mutual

interference. Check the performance using actual machines before performing detection.

Amplifier

I/O Circuit

When the stability output is not used, cut the orange cable

at the root, or connect this cable to the 0 V terminal of the

power supply.

When the external calibration input is

not used, cut the pink cable at the

root, or connect this cable to the

positive terminal of the power supply.

Power to the PS-T2 is

supplied through the PS-T1,

FS-T1 or FS-M1.

Innovative design and high performance for

stable detection in harsh environments

Superb ease-of-use in setup operation

Model PS-T1 PS-T2 PS-T0

Response time 500 µs 660 µs to 1.2 ms

Operation mode LIGHT ON/DARK ON (switch-selectable)

Indicators

Output indicator: Red LED, Stable operation indicator: Green LED,

Calibration indicator: Yellow LED

Timer function ON-delay: 40 ms, OFF-delay: 40 ms, Timer OFF (switch-selectable)

External calibration Non-voltage input

input signal (contact, solid state)

Control output NPN open-collector 100 mA max. (40 V max.)

Residual voltage: 1 V max.

Stability output NPN open-collector 50 mA max. (40 V max.)

Residual voltage: 1 V max.

Protection circuit

Reverse polarity protection, Over-current protection, Serge absorber

Power supply voltage 12 to 24 VDC ±10%, Ripple (P-P) 10% max.

Current consumption 35 mA max.

Ambient temperature -10 to +55°C

Relative humidity 35 to 85%

Vibration 10 to 55 Hz, 1.5 mm double amplitude in X, Y and Z

directions, 2 hours respectively

Shock immunity

500 m/s

{Approx. 50 G} in X, Y and Z directions, 3 times respectively

Housing material Body/Cover: Polycarbonate

Weight Approx. 75 g Approx. 40 g Approx. 20 g

(including 2 m cable)

Built-in

(Connector type)

PS-201/PS-201C

Long-range

Model

Teflon

-sheathed Definite reflective Long-range Thin, small

Thrubeam Reflective Thrubeam Reflective Thrubeam Reflective

PS-201(C) PS-202 PS-205 PS-206 PS-47(C) PS-49(C) PS-55(C) PS-05 PS-45 PS-58 PS-52(C) PS-56 PS-46 PS-48

Light source Infrared LED Red LED Infrared LED

Detecting distance FINE 2,000 500 200 70 10 ± 4 32 to 53 2,000 200 700 300 100 25

(mm) TURBO

4,000 1,000 400 — 4,000 400 — 600 —

Smallest detectable FINE 0.8 dia. 0.5 dia. — 1.0 dia. — 0.5 dia. 0.3 dia. —

object

(mm) TURBO 1.2 dia. 0.5 dia. — 2.0 dia. — 0.3 dia. —

Enclosure rating IP-67 — IP-64 IP-67 — IP-67

Mutual interference suppression

No interference (side-

(When expansion units are connected) by-side mounting)

Ambient temperature -10 to +60°C

Relative humidity 35 to 85%

Weight (including 2-m cable) Approx. 40 g Approx. 60 g Approx. 30 g

Approx. 40 g

Built-in

——

1 2 3 4

Comments to this Manuals

No comments

Enviro M-55C-FS User Manual Page 3

Comments to this Manuals

Related products and manuals for Pellet stove Enviro M-55C-FS